Brad Nailer vs. Brad Nailer Finishing Nailer: You'll Know It In 1 Minute - CohaiTungChi Tech (2023)

Brad nailers are more for the finishing touches than the nailers who do the actual carpentry work..

What does the caliber number mean?

If you can drive 15 nailsside by sidein an inch,They have a track width of 15'.


I couldn't find another site with this information!Old-fashioned.“Subway” is just a word for most people these days. See my video on the meter below.

Our vision:
Most deals will end up with at least 2-3 guns.

  • The Brad Nailer will not tear through delicate materials
  • Finishing nail for penetrating finish wood and hard materials.

If you have to choose one first, then choose this nail gun. There are cheaper pneumatic and electric ones below.


Which one? Brad Nailer vs. Nagler done?
As Dirty Harry said, "You have to ask yourself a question."

The only question is: What else do you do?

The main difference:The nails are smaller'Messer'Nails, with smaller heads (like my head, Bradthepainter). Size matters, Brad.

  • Finished nails are 14, 15, or 16 gauge
  • The Brads are generally 18 years old.
  • Brad Nailers are used for the finishing touches. Use a finish nailer for larger projects..

Most guns can fire in two modes: sequence and collision... Read our posts on nailers if you don't know what that is.

(Video) Which To Buy First, Finish Nailer Or Brad Nailer?


  1. Available nail lengths:5/8 to 2½ inches. (Different weapon specifications may be different.)
  2. Diameter nails:A Brad nail gun shoots 18 gauge nails (smaller than finished nails).
  3. Preis:Brad Preachers are more in demand, so competition drives down the price. There are quality pistols and cheap pistols (see my review of Brad nailers for different budgets).
  4. Characteristics:The nails are thinner points, so the holes are small and often unfilled.
  5. Versatility:Some brad nails generally accept staples as opposed to finish nails. No Brad nailer that we know of comes with an angle magazine (but it doesn't really matter for small projects).

Key: no cracking when handling delicate materials.

  • CONTRAST: Nails will not penetrate thick plywood or even medium density MDF board.

See more informationWhat causes peeling fingertips? How do you deal with that?

You can see Brad's Brad Gun here, an amazing tool.

Use:For finishing touches (instead of maintaining performance)

Brad Nailer vs. Brad Nailer Finishing Nailer: You'll Know It In 1 Minute - CohaiTungChi Tech (1)
  • Small handicrafts such as picture frames, birdhouses, children's toys
  • Moldings and narrow moldings, boiserie, jewelry boxes or fixing moldings and decorative edges in cabinets.
  • Doorstop (no doorstop)
  • Hold while the glue dries.

are hammer nailsfusesto be used manually, but not with a nail gun.

If you used a hand stapler, it can handle an 18 gauge nail.

Minor changes: Brad Nailer vs. Brad Nailer. Brad Nagler Finish Nagler The winner is Brad Nagler.


  1. Available nail lengths:1 to 2 ½ inches long (various gun specs may vary).
  2. Diameter nails:Finished nail guns fire 14, 15, and 16 power nails.
  3. Preis:Nail finishing of all kinds is about 30% more expensive than brad nails in general, but as we'll see, they can do so much more.
  4. Characteristics:You can attach extensive carpentry work - create a permanent hold.
  5. versatility: Major benefit: You can use one finisher with a wider range of materials.
Brad Nailer vs. Brad Nailer Finishing Nailer: You'll Know It In 1 Minute - CohaiTungChi Tech (2)

Use:Any project where you need structural integrity, not just looks. Strong enough to penetrate thick plywood or even medium density MDF fiberboard.

  • some closet parts
  • chair rail
  • disguise
  • door boxes
  • skirting boards
  • Finishing work (window frames, etc.)
  • wide crown bar
  • Nails are more difficult to remove with tweezers than with nails

Finishing/finishing nailer holes are larger,then you need to fill them with putty or putty.

Tintable or pre-colored putty is covered in our Nail Accessories post.

Limits:You cannot hold the pins together and small decorative embellishments can break off.

Medium Jobs: Preacher Brad Vs Finisher, the winner is the Finisher.

More to know...

Not sure if you want electric or pneumatic? Proceed directly to the next section.

(Video) 6 Nail Gun Mistakes You Should Avoid | Brad Nailer Tips

If you have decided on pneumatic or electric,Your work here is done:

We have 5 posts on nail guns and accessories - you can tell I love them. I have selected only the best grades that you will put in your will. We have…

  1. A whole post about quality brads.
  2. Finish Nails Review: Surprisingly Affordable
  3. Best Toys for Big Kids: Frame Bolts Comparison
  4. The Smallest of Them All: A Review of Pinnails (23 Gauge)
  5. Nail fixation and nail accessories

Electric or Neumatic? (last question)

There are a few different types below (gas etc) but most people use air or electricity. (Most woodworkers these days are going electric even if they already have a compressor for other air tools.)

See more informationWhat Causes Those Vertical Black Lines on Nails? We asked a pro

Go electric:

  • Electric ones are expensive, but the good ones are tools you leave to your grandkids. (see our list of the best finishing nails).
  • Obviously pneumatic nailers need an air compressor to work. Then add theair compressor kostento the account: a single fee shared by all your tools.
  • Cordless: Working up a ladder with an air hose is literally a feat of strength.
  • Battery charge problem with electric brad nailer and electric brad nailer.

tire go:

  • Air tools are cheaper if you want to stock up on the full range of nail guns.
  • All of the compressors we've listed in our nail gun accessories article can run anything from a nailer to two frame guns.
  • Oil:All tires need air tool oil every day if they're used all day, and some electrics need a drop every now and then.
Honorable Mention

There are also some gas cartridge nails and finishes that we don't cover in our nail gun review posts:

  1. Gas Cylinder Finish Nailer: Cordless and lightweight, but you have to buy the propane canisters. Popular on many construction sites. A great nail gun.
  2. A gas nailer is hard to find... but... If you've just found three hundred dollars in your drawer and don't know what to do with it, buy the Paslode gas nailer.Like a beautiful natural phenomenon.

VIDEO: This gentleman has thebestes youtube-videoin the selection: Brad Nailer vs. graduation nail Brad Nagler


We need both. We just do it. How to have different screwdrivers.

But if you have to choose one first...16 is the sweet spot.

A 16 gauge finish nailer is what we think is right if you only need one.

Read my research on some high quality nail polishes.

(Video) How to Use a Brad Nailer | RYOBI Tools 101

Great gift for the carpenter in your life: Accessories: Nail Gun Accessories Page

the results of a survey

I asked a few carpenters, carpenters and DIY enthusiasts what they would recommend to anyoneI only want to buy one gun:

driving a nail vs. finishing the nail?

Öunanimously Result:

  • Brad Nailer vs. Nagellackto the owner……………Nail polish
  • For himhobby carpenter.................................................. .. ................ .. .............. Brad predictor
  • Brad Nagler or Finish Nagler for oprofessional carpenter……………..Both
  • Brad Nailer vs. Nagellack alsGiftto one of the above …………………….Brad Nagler
Beginners corner:

It is very important to use a brad nailer or finish nailer safely.

Good maintenance and security practices are the main things that people forget.

I still get asked, "What is a nail?" and "how to use a brad preacher."

The nail isn't anything fancy anyway - just a simple 18 gauge nail that can disappear into wood. A nail gun makes it easy - nails are hard to work with by hand. One important thing is to practice observing the grain of the wood. When you shoot the front sight does it start cracking? And if you shoot at the end of the board?

See more informationCan acrylic paint be used as nail polish?

Want to know how they work?Bingo.(how things work website)

The ultra-cheap alternative:

Want to keep it simple? Just buy a combination gun: nailer/tacker.

It looks like a tacker... it shoots crown staples just like a tacker, but it also shoots nails of different lengths.

(Video) 9 BRAD NAIL MISTAKES (and how to avoid them!)

The only downside is that the power only comes from your muscles (a good thing if you like it easy) so your hand gets tired if you do a lot. I'm reviewing this babyIn this video.

I love my Dewalt...Stamped on the gun is a third-party list of headstock/clamp model numbers for a reload.Too confident? Good move, Dewalt.

Summary:the difference between the characteristics of the brad nailer and the finish nailer.

We were asked to answer a few questions: "What is a nail? What size are the nails to finish the baseboard? What can a 16 gauge finish nailer do? What can an 18 gauge nail contain?'

This is our take on the Finish Nailer vs Brad Nailer fight. Are we missing something? Now can you tell someone what a brad nailer is? We hope you enjoy our look at the fundamental differences between the 18 gauge brad nailer and the 16 gauge rim nailer It all comes down to the actual performance of the brad nailer versus the brad nailer.

The 18 gauge nail gun is not the finish nail gun, but the finish nailer, also known as the finish nailer (there is no difference between a "finish nail gun" and a "finish nail gun"), is your best bet for any job, even framing a wall and taller than a breadbox!

Notice thatThe United States government has a pdf.oneNail Gun Safety:excellent; 20 p.

Security Council:These guns are dangerous (37,000 emergency accidents per year in the US). Many nail gun manufacturers supply safety goggles with the tool. Just cover your ass? Yes, but it tells you something. It's not the wood flying out of the hole that you're worried about. is the nail think about it.

Let us know what you like better between clipped nails and pinned nails in the comments. Thank you very much!

Two videos: This is livemy old electric staplerand shown below are nail gauges. Enjoy your guns.



Which is better brad nail or finish nailer? ›

In general, go with finish nails for thick wood and brads for thin wood. Finish nails are stronger than brads, so choose them if your project needs to be durable. Brads are thin, 18-gauge nails made for more delicate woodworking jobs. They're available in collated strips for nail guns or individual pieces.

What is the difference between a brad nailer and a finish nailer Milwaukee? ›

What's the Difference Between a Brad Nailer vs Finish Nailer? The main difference between these two different nail guns is the size of the nail they shoot. The lower the gauge number, the thicker the nail. The brad nailer fires 18 gauge nails, and the finish nailer fires 16 gauge nails.

Should I use a brad nailer or finish nailer for baseboards? ›

Brad nailers shoot 18-gauge nails, which are thinner and have a smaller diameter than finish nails. Finish nailers are best for heavier duty projects, such as baseboards, door and window frames, trim work, and cabinetry.

What type of finish nailer is best? ›

And don't miss the list of some of the top finish nailers on the market.
  • BEST OVERALL: DeWalt 20V Max Angled Finish Nailer DCN660B.
  • RUNNER-UP: Metabo HPT Angled Finish Nailer Kit.
  • BEST BANG FOR THE BUCK: NuMax SFN64 Pneumatic Straight Finish Nailer.
  • BEST PNEUMATIC: Senco 4G0001N FinishPro 42XP Finish Nailer.
Oct 19, 2022

What is the most versatile finish nailer? ›

If you're doing a lot of trim work and don't want to own multiple guns, the 16-gauge is probably the most versatile. These nailers are available in pneumatic and cordless configurations.

Can I use a brad nailer instead of a finish nailer? ›

The quick answer is no. You must use the correct type of nails for your nail gun. Brad nails are a little different than finish nails because they are a smaller gauge (less thick) and they don't have a large head on the end of the nail.

Which is better 16 gauge or 18-gauge brad nailer? ›

Gauge is actually the number of nails that are lined up. This indicates that 16-gauge nails are thicker and can hold better when compared to 18-gauge brads. You will have to keep in mind that a low gauge number will have a thicker nail.

What type of nail gun is best for baseboards? ›

A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.

What nailer to use for quarter round? ›

If you're doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job.

Will a brad nailer work for drywall? ›

I prefer using brad nails shot by a pneumatic nailer to attach small drywall pieces to the stud or scrap wood. Drywall screws have a tendency to damage small pieces of drywall or even damage cut edges of a bigger sheet of drywall--which is very frustrating.

Can you use 18 gauge Brad nails for baseboards? ›

6. What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5'' long which is an ideal length for baseboard nails.

What nailer is best for framing? ›

15-degree nail guns can hold a large number of full-round-head nails, which are ideal for floor joists, wall studs and other framing jobs. Full-round-head nails are often required for framing by building codes.

What size brad nailer is best? ›

Having the right length of brad is crucial for a good result. The rule is simple: a brad should be three times as long as the thickness of the material you are fixing. Example: if the material is 15 mm thick, the brad should be 45 mm long. Choose a brad gun that takes the length of brad you need.

What nailers are most often used in woodworking? ›

For most woodworking builds and projects a Finish, Brad, and/or Pin Nailers are a great addition to your workshop. Try to stay away from Roofing and Framing Nailers as these mighty nail guns have the potential of damaging your projects.

Do you use brad or finish nailer for shiplap? ›

We recommend using 16- or 18-gauge finish or brad nails. 1-½” to 2” in length should be sufficient. Both gauges are strong enough to hold the lumber securely, but small enough to not leave a large hole on the face of the board.

What is a finishing nail gun used for? ›

Like its name suggests, a finish nailer is used for attaching finishing materials—think affixing molding to the outside of a window frame or installing crown molding. This type of power tool requires a lower-gauge nail (15-gauge nails or 16-gauge nails), meaning the nail is thicker than 18-gauge brad nails.

Do I need 16 or 18 gauge nailer for hardwood floor? ›

Generally speaking, 16 gauge (larger fastener) would be used to install 1/2" to 3/4" thick Solid hardwoods like Oak, Maple, Pine, etc. 18 gauge cleats (thinner fastener) would be used for softer engineered flooring or more dense exotic woods like Strand woven bamboo, Brazilian cherry, etc.

What gauge finish nailer is best? ›

If you're shopping for a finish nailer, I'd recommend the larger 15-gauge gun, simply because the fatter nails provide more holding power.

What size brad nails are best for baseboards? ›

So it's best, before you begin the project, to be absolutely sure you're using the right nail size for baseboards in your home. As a general rule, baseboard nails shouldn't be any longer than 2 inches. The ideal length is between 1.5 inches and 2 inches.

What size brad nails to use for baseboard? ›

When installing baseboard trim, you should use 2-inch (6d) or 2½ -inch (8d) 15-18 gauge finishing nails. However, using shorter 1 ½ inch finish nails would be better if the trim is fragile.

Do you caulk between quarter round and baseboard? ›

To Install Quarter Round Use Nails Not Caulk

Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future. It is not the right choice because it won't create a strong enough bond like glue will.

Is it better to glue or nail quarter round? ›

A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don't glue it.

Do brad nails need to go into studs? ›

As long as you're inserting the nails into the top 3 inches of wall, locating studs isn't necessary.

Can you use Finish Nailer for studs? ›

No, a finish nailer cannot be used for framing. The nails used in a finish nailer are not long or strong enough to properly join construction lumber.

Do you nail drywall to studs? ›

Don't use nails for securing into drywall: Use drywall screws for securing drywall to studs. Drywall nails should only be used for tacking up. Make sure edges have stud backing: Add an additional 2-inch by 4-inch backing to the edges of the frame if the frame does not already have it.

What are Brad nails best used for? ›

Brads are commonly used to attach shoe moldings and small ornamental parts on furniture. Brads are also useful when gluing delicate wooden parts together. It's often helpful to apply glue to a joint and then drive a few brad nails into your project to hold everything while the glue dries.

Should I use 16 or 18 gauge nailer for baseboards? ›

What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5'' long which is an ideal length for baseboard nails.

What nail gun is best for DIY? ›

Brad nailers are the nail gun most commonly used by DIYers. Most shoot 18-gauge brad nails up to 2 inches in length. These are very versatile tools with a wide range of applications, including furniture building, light construction, and repair tasks around the home or yard.

What size nail gun is best for baseboards? ›

15-gauge finish nailer

This is the gun I usually grab for nailing large 3/4-in. -thick baseboard and trim. It's also a good choice for more demanding jobs like nailing doorjambs or stair treads.

What is the best use for 18-gauge brad nailer? ›

18-gauge brad nailers are perfect for fragile pieces making them great for decorative molding, paneling, casing, and trim work. It has a nail length of 0.5 to 2.5 inches and the thickness is 0.0475-inch. The best thing is that it is very handy and can provide an intricate finish.

What is the difference between 16 gauge and 18-gauge brad nailer? ›

In simple terms, gauge means how thick the fastener is. It is also defined as the number of nails that are lined up. This means that a 16-gauge nail is thicker and stronger than an 18-gauge brad. For clarity, ‌we can say that the lower the gauge number, the thicker the nail.

Do you use 16 or 18 gauge nailer for quarter round? ›

If you're doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job.

What is the most commonly used nail gun? ›

Pneumatic: A pneumatic nail gun, or air nail gun, uses compressed air to power the nail gun. The most popular of all nail guns, pneumatic nail guns are a reliable choice for professionals because they offer incredible power and come in a variety of makes and models.

What degree of nail gun is best? ›

21-degree nailers are better suited for construction projects, while 30-degree nailers are more versatile and can be used for smaller projects around the home. The 30-degree nailer is more compact and lightweight, making it easier to use in tight corners.

What's the difference between a brad nailer and a nail gun? ›

Brad nailers use smaller 18-gauge nails.

They vary in length from ½ to 2½ inches. By comparison, a 16-gauge finish nail is 0.0625-inch thick. While the difference doesn't seem like very much, the shorter length is a good indicator that a brad nail won't hold material of the same maximum thickness as finish nails.


1. Which Nail Gun Do I Need to Buy?
2. Ryobi AirStrike P320 and P325 Nail Gun Review - Nail Guns Everywhere!
(Atomic Dairy)
4. Best Cordless Finish Nailers 2022 | Top 10 Cordless Finish Nailer Buying Guide
(Top 5 Product)
5. Milwaukee M18 FUEL -vs- Ryobi AirStrike ( 2740 / P320 ) 18v Brad Nailers
(Real Tool Reviews)
6. How to Choose a Finish Nailer | This Old House: Live
(This Old House)
Top Articles
Latest Posts
Article information

Author: Merrill Bechtelar CPA

Last Updated: 27/02/2023

Views: 5766

Rating: 5 / 5 (70 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.